Hackintosh Post Installation Problems Sequoia

[Innovatekgalatina]

Hello everyone. I have had a hackintosh with Sequoia installed for months.
my pc configuration is:
intel i3-6100
16gb of ram
gt 730 2gb video card
everything works great, I can't complain except that if I don't use the pc for a while and I go to use it I find it completely frozen and I have to force restart it. I checked my plist, disabled hibernation, screensaver or stand-by (all disabled) can you help me understand what it could be? thanks in advance

 

[EliteMacx86]

Hello everyone. I have had a hackintosh with Sequoia installed for months.
my pc configuration is:
intel i3-6100
16gb of ram
gt 730 2gb video card
everything works great, I can't complain except that if I don't use the pc for a while and I go to use it I find it completely frozen and I have to force restart it. I checked my plist, disabled hibernation, screensaver or stand-by (all disabled) can you help me understand what it could be? thanks in advance

Attach your EFI to check!

Also, note that NVIDIA is completely unsupported, and the support is experimental. The i3-6100 has IGPU and it can be patched and should be more stable than using the NVIDIA.

 

[Innovatekgalatina]

I use the PC for graphics and I can't use the igpu. everything works fine I don't understand why it freezes when I don't use it for a while. I'm attaching the efi. I'll start by saying that I used opencore legacy patcher to patch my nvidia

 

[Innovatekgalatina]

Attach your EFI to check!

Also, note that NVIDIA is completely unsupported, and the support is experimental. The i3-6100 has IGPU and it can be patched and should be more stable than using the NVIDIA.

yesterday it froze for the umpteenth time after I left it to go shopping. I found it completely frozen and with many lines on the display

 

[EliteMacx86]

I use the PC for graphics and I can't use the igpu. everything works fine I don't understand why it freezes when I don't use it for a while. I'm attaching the efi. I'll start by saying that I used opencore legacy patcher to patch my nvidia

The EFI is not as per the guide. Here are a few issues

Make the following changes to your config.plist

Remove the patch from ACPI>Patch section
Remove the following boot args: dart=0 igfxonln=1 darkwake=0

Once you're done with the changes, save your config.plist. Restart the system and reset NVRAM twice. Attach the new PR files.

 

[Innovatekgalatina]

The EFI is not as per the guide. Here are a few issues

Make the following changes to your config.plist

Remove the patch from ACPI>Patch section
Remove the following boot args: dart=0 igfxonln=1 darkwake=0

Once you're done with the changes, save your config.plist. Restart the system and reset NVRAM twice. Attach the new PR files.

sorry for my ignorance. what is PR files?

 

[Innovatekgalatina]

The EFI is not as per the guide. Here are a few issues

Make the following changes to your config.plist

Remove the patch from ACPI>Patch section
Remove the following boot args: dart=0 igfxonln=1 darkwake=0

Once you're done with the changes, save your config.plist. Restart the system and reset NVRAM twice. Attach the new PR files.

nothing to do it continues to fizz even if you leave it still for just 10 minutes

 

[Innovatekgalatina]

The EFI is not as per the guide. Here are a few issues

Make the following changes to your config.plist

Remove the patch from ACPI>Patch section
Remove the following boot args: dart=0 igfxonln=1 darkwake=0

Once you're done with the changes, save your config.plist. Restart the system and reset NVRAM twice. Attach the new PR files.

Hi, the problem is starting to become more frequent than usual. Can you help me solve it please? Without giving up the dedicated video card?

 

[EliteMacx86]

Hi, the problem is starting to become more frequent than usual. Can you help me solve it please? Without giving up the dedicated video card?

Are you using NVIDIA or Intel IGPU?

 

[Innovatekgalatina]

Are you using NVIDIA or Intel IGPU?

nvidia gt 730