SOLVED Dell Inspiron 15R SE ( 7520) Monterey Post Installation

[EliteMacx86]

Yes, but is there any way to factory disable the intel GPU and use the DGPU instead?

No, it's done when designing the logic board.

I see , you have edited my post title. now the title is very suitable for this discussion.

It has been split from your previous thread as the original issue was solved. If you want to see your old thread, refer to the link below.

SOLVED - Intel HD4000 macOS Monterey 12.6 - Laptop's internal display not working, External monitor is working - Dell inspiron 15R SE ( 7520)

Dear Admin, I hackintoshed my Dell laptop inpiron 15R SE (7520) with macos Monterey 12.6 from Olarilla's website. After the installation of Monterey 12.6 , initially my system detected only 4MB of VGA of INTEL HD 4000. Therefore i installed the application...

elitemacx86.com

 

[abdulahath]

No, it's done when designing the logic board.

ok.

It has been split from your previous thread as the original issue was solved. If you want to see your old thread, refer to the link below.

SOLVED - Intel HD4000 macOS Monterey 12.6 - Laptop's internal display not working, External monitor is working - Dell inspiron 15R SE ( 7520)

Dear Admin, I hackintoshed my Dell laptop inpiron 15R SE (7520) with macos Monterey 12.6 from Olarilla's website. After the installation of Monterey 12.6 , initially my system detected only 4MB of VGA of INTEL HD 4000. Therefore i installed the application...

elitemacx86.com

Noted

 

[abdulahath]

No, it's automatically done via WEG.

GFX0 to IGPU enables IGPU PM. However, this is automatically done via WEG and is not required.

Understood

 

[EliteMacx86]

Now you should consider patching the DSDT and SSDT first and then proceed with the rest of the Post Installation task.

 

[abdulahath]

No, OpenCore has a different process that is not documented on this forum yet. Will be documented soon. In the meantime, you can use Clover Bootloader to extract the native ACPI Files.

I'm not familiar with Clover.
How can i do this?
"To begin with the process of extraction, make sure the Clover bootloader has been installed either on your installation USB or the system drive. If you haven't installed it, make sure to install it." ?


And also please advise
Which order should i do the below tasks?
1. https://elitemacx86.com/threads/how-to-patch-laptop-dsdt-and-ssdts.178/
2. https://github.com/acidanthera/AppleALC/wiki/Adding-codec-support

 

[macpro]

I needed the xcode version 13.3.1 , therefore i cannot stick with Big Sur. Regarding Graphics acceleration, after OCLP patch it's usable for me.

i disagree with your second statement. Admin has requested me to use OCLP and it's done the purpose.

ahh ok, if full hardware graphics acceleration is not required then well done on getting Monterey working

 

[abdulahath]

Now you should consider patching the DSDT and SSDT first and then proceed with the rest of the Post Installation task.

ok. I'll keep you posted.

 

[EliteMacx86]

I'm not familiar with Clover.
How can i do this?
"To begin with the process of extraction, make sure the Clover bootloader has been installed either on your installation USB or the system drive. If you haven't installed it, make sure to install it." ?

GUIDE - How to Install Clover Bootloader [UEFI/Legacy]

How to Install Clover Bootloader [UEFI/Legacy] An EliteMacx86 Exclusive Guide - This guide covers the installation of Clover Bootloader for UEFI and Legacy systems for booting macOS. 1. Download Clover Bootloader 2. Right click on the .pkg file you downloaded above and select Open. 3. Once you...

elitemacx86.com

Before proceeding, make a backup of your configuration and transfer it to any USB Flash Drive. Remove the OC Configuration from your ESP and then proceed with the Clover installation. Note that you don't need to configure the config.plist to extract the ACPI Tables.

And also please advise
Which order should i do the below tasks?
1. https://elitemacx86.com/threads/how-to-patch-laptop-dsdt-and-ssdts.178/
2. https://github.com/acidanthera/AppleALC/wiki/Adding-codec-support

Patching the DSDT and SSDTs first. Just skip the Layout ID patch for now.

 

[EliteMacx86]

if full hardware graphics acceleration is not required

Without the Graphics acceleration, the whole system is so slow, with random freezes and artifacts. The performance is nearly similar to Virtual Box and VMware.

 

[EliteMacx86]

ok. I'll keep you posted.

Great!