GUIDE Intel HD Graphics 4200/4400/4600 on macOS 10.12.x and Later on Laptops [Clover/OpenCore]

[rBoLt168]

Hi EliteMac appreciate your attention on this, thank you. I attached a new set of PR files. I have been formatting this machine for the 4-5 times already. Just to mention again that I unchecked the Intelinject so I can boot up the machine, else I till have the "kext Stall 'IGPU' " and won't be able to take the screenshots.

Intel UHD Graphics: HD4200
OSX: 10.13.6

thank you in advance.

Just a quick update, my audio is working now.
So I am left with this video graphics limitation.

 

[EliteMacx86]

Hi EliteMac appreciate your attention on this, thank you. I attached a new set of PR files. I have been formatting this machine for the 4-5 times already. Just to mention again that I unchecked the Intelinject so I can boot up the machine, else I till have the "kext Stall 'IGPU' " and won't be able to take the screenshots.

Intel UHD Graphics: HD4200
OSX: 10.13.6

thank you in advance.

Use the config.plist from here: https://www.elitemacx86.com/threads/guide-creating-a-basic-config-plist-file-for-booting-macos.257/
Make sure you change the SMBIOS to iMac 14,2
Remove FakePCIID.kext and FakePCIID_Intel_HDMI_Audio.kext from Clover/Kexts/Other
Change the ig-platform-id to 0x0d220003 and also check Inject Intel checkbox.

Reply with new set of files.

 

[rBoLt168]

Hi Elitemac, Thank you for coming back to me. I tried those you suggested without any luck.
I also have to uncheck the Inject to boot-up.
new PR attached please the verbose screenshot.

thank you for your support.

 

[EliteMacx86]

Hi Elitemac, Thank you for coming back to me. I tried those you suggested without any luck.
I also have to uncheck the Inject to boot-up.
new PR attached please the verbose screenshot.

thank you for your support.

Intel GFX is empty. Use 0x04128086
Update Lilu.kext

 

[rBoLt168]

Thank you EliteMac, now I can boot with Inject ticked. Unfortunately the VRAM is still 7MB. Attached updated PR files.

 

[EliteMacx86]

Thank you EliteMac, now I can boot with Inject ticked. Unfortunately the VRAM is still 7MB. Attached updated PR files.

Set DVMT Pre-Allocated to 64MB
The IGFX should be "0x04128086" not 0x04218086
Attach a kextcache output. Type "sudo kextcache -i/" in terminal.

Reply with new set of PR files.

 

[rBoLt168]

Hello mate,

DVMT adjusted and IGFX also fixed.
Back to the same problem were I can't boot without unchecking the Inject.

 

[EliteMacx86]

Hello mate,

DVMT adjusted and IGFX also fixed.
Back to the same problem were I can't boot without unchecking the Inject.

The Acpi patch "Change GFX0 to IGPU" is missing from the config.plist. The ig-platform-id has been also changed. Use 0x0d220003 as a platform id.
Remove the following kexts from S/L/E
Lilu.kext
AppleALC.kext
WhateverGreen.kext

Remove the following kexts from L/E
Lilu.kext
WhateverGreen.kext
FakeSMC.kex

Reply with new set of files

 

[rBoLt168]

Hello EliteMac,

thank you for your feedback and tips.
all advices are performed but still cannot boot with Inject.

thanks for your support.

 

[EliteMacx86]

Hello EliteMac,

thank you for your feedback and tips.
all advices are performed but still cannot boot with Inject.

thanks for your support.

Install FakePCIID.kext and FakePCIID_Intel_HD_Graphics.kext to S/L/E
Reboot and you should be good to go.
Reply with new sets of files.