• Become a Premium Member for $25/year with no ads to improve your community experience. Upgrade to Pro Account for faster response and no wait times!

Storage Compatibility for macOS

OK thanks .. here's the files...
Your configuration is not as per the guide.

Here are a few issues

Make the following changes to your config.plist:

- Remove SSDT-GPU-DISABLE.aml, SSDT-EC.aml and SSDT-USBX.aml. RX580 is a natively supported card and you don't need to disable it unless you have an unsupported GPU installed. Use SSDT-EC-USBX.aml from OpenCore package. Just make sure to change PCI0 to PC00 in the SSDT.

- Either remove SSDT-SBUS-MCHC.aml or the MC to MCHC rename. You shouldn't be using both together!

- Set ResizeAppleGpuBars to -1 and also disable it from your BIOS.
- Remove all entries from DeviceProperties section.
- Kexts loading order is not correct. Important Kexts should load first
- Remove MinKernel from Emulate section.
- Set KernelArch to Auto.
- Disable CustomSMBIOSGuid.
- Disable DisableRtcChecksum in Kernel section.
- Remove EnableTRIM Key from the NVRAM
- Remove dart=0 boot args.
- Add alcid=12 in boot args.
- Set UpdateSMBIOSMode to Create
- Drivers loading order is not correct. Important Drivers should load first.

Once you're done with the changes, save your config.plist. Restart the system and reset NVRAM twice. Attach the new PR files.
 
Your configuration is not as per the guide.

Here are a few issues

Make the following changes to your config.plist:

- Remove SSDT-GPU-DISABLE.aml, SSDT-EC.aml and SSDT-USBX.aml. RX580 is a natively supported card and you don't need to disable it unless you have an unsupported GPU installed. Use SSDT-EC-USBX.aml from OpenCore package. Just make sure to change PCI0 to PC00 in the SSDT.

- Either remove SSDT-SBUS-MCHC.aml or the MC to MCHC rename. You shouldn't be using both together!

- Set ResizeAppleGpuBars to -1 and also disable it from your BIOS.
- Remove all entries from DeviceProperties section.
- Kexts loading order is not correct. Important Kexts should load first
- Remove MinKernel from Emulate section.
- Set KernelArch to Auto.
- Disable CustomSMBIOSGuid.
- Disable DisableRtcChecksum in Kernel section.
- Remove EnableTRIM Key from the NVRAM
- Remove dart=0 boot args.
- Add alcid=12 in boot args.
- Set UpdateSMBIOSMode to Create
- Drivers loading order is not correct. Important Drivers should load first.

Once you're done with the changes, save your config.plist. Restart the system and reset NVRAM twice. Attach the new PR files.
well the SSDT-GPU-DISABLE.aml i made because i need to disable the other gpu card i have in my pc (RTX 4070).
 
also the kext and the driver order where i can find to do right?

also when u say remove all DeviceProperties section. you mean this red?
 
Last edited:
here's the new config list fixed after your check.
 

Attachments

well the SSDT-GPU-DISABLE.aml i made because i need to disable the other gpu card i have in my pc (RTX 4070).
Then its good.
 

Forum statistics

Threads
1,935
Messages
18,092
Members
27,837
Latest member
daemon6109