[SOLVED] macOS Catalina and Intel HD 4400

[Kernel]

I Installed macOS Catalina, everything is working fine, except the graphics. System Properties shows 4mb, Night Shift and Airplay not working, no brightness slider in System Preferences - Display.
I have Intel HD Graphics 4400.

Can anyone help please?

 

[EliteMacx86]

I Installed macOS Catalina, everything is working fine, except the graphics. System Properties shows 4mb, Night Shift and Airplay not working, no brightness slider in System Preferences - Display.
I have Intel HD Graphics 4400.

Can anyone help please?

No PR files attached.

 

[Kernel]

I attached PR files to this reply.

 

[EliteMacx86]

I attached PR files to this reply.

Your system has the following issues.

Remove the following kexts from L/E

• XHCI-unsupported.kext
• FakeSMC.kext
• VoodooPS2Controller.kext
• ATH9KFixup.kext
• Lilu.kext
• FakePCIID.kext
• AppleHDADisabler.kext
• Niresh'sExtra.kext
• CPUFriend.kext
• USBInjectAll.kext
• NullCPUPowerManagement.kext
• GenericUSBXHCI.kext
• FakePCIID_XHCIMux.kext
• RealtekRTL8111.kext
• NightShiftUnlocker.kext
• WhateverGreen.kext
• FakePCIID_Intel_HDMI_Audio.kext
• AppleALC.kext
• VoodooHDA.kext
• AirportBrcmFixup.kext
• BT4LEContinuityFixup.kext
• AHCIPortInjector.kext
• NoTouchID.kext
• HibernationFixup.kext
• ACPIBatteryManager.kext
• FakePCIID_Intel_HD_Graphics.kext

Remove the following kexts from S/L/E

• BTFirmwareUploader.kext

The config.plist, drivers and kexts are not as per the guide.

Start here:

GUIDE - How to Boot macOS Installer on Laptops using Clover (UEFI/Legacy)

Booting macOS installer on laptops can be a challenge for the new users. This guide covers a complete step to boot the macOS installer on your Laptop using Clover bootloader. Those who are not using Clover, can update their configuration for clover and continue to use it. Clover is one of the...

www.elitemacx86.com

Attach the new PR files.

 

[Kernel]

I deleted these files, and rebooted. My laptop stuck at IOConsoleUser: gIOScreenLockState 3, hs 0, bs 0, now 0, sm 0x0.

So from an usb, in terminal, I recovered files, and the laptop booted.

 

[EliteMacx86]

I deleted these files, and rebooted. My laptop stuck at IOConsoleUser: gIOScreenLockState 3, hs 0, bs 0, now 0, sm 0x0.

So from an usb, in terminal, I recovered files, and the laptop booted.

Well, if your Laptop was stuck, you could have post the issue. Note that the solution was not to recover those irrelevant kexts. You can follow the instructions or find any other place for help.

 

[Kernel]

Can you just write the steps, or the problem reporting file is important?

 

[EliteMacx86]

Can you just write the steps, or the problem reporting file is important?

Of course it's mandatory. Refer to this post and attach your new PR files. If you're unable to boot, provide a video of verbose. Also, make sure you follow the Laptop guide to prepare the correct configuration.

 

[Kernel]

Updated PR files (Also now my computer booted).

 

[EliteMacx86]

Updated PR files (Also now my computer booted).

Remove the following kexts from /L/E

• ATH9KInjector.kext
• FakePCIID_BCM57XX_as_BCM57765.kext
• FakePCIID_Broadcom_WiFi.kext
• FakePCIID_AR9280_as_AR946x.kext
• FakePCIID_Intel_GbX.kext

Attach new PR files.