No acceleration and 3mb VRAM on HD 530 in Ventura 13.5.2

[User5690]

Hello, everyone. I'm trying to make my igpu work . I tried many workarounds , can you help me? Maybe I skipped one that will work for me. I'm using Ventura 13.5.2 / Cpu: Intel Core i3 6100 / Motherboard:MSI H110M Pro-Vd connected via DVI to hdmi adapter to my TV. Here's what already tried after applying system loads only 1/3 of the loading bar and no signal appears.​

 

[EliteMacx86]

Hello, everyone. I'm trying to make my igpu work . I tried many workarounds , can you help me? Maybe I skipped one that will work for me. I'm using Ventura 13.5.2 / Cpu: Intel Core i3 6100 / Motherboard:MSI H110M Pro-Vd connected via DVI to hdmi adapter to my TV. Here's what already tried after applying system loads only 1/3 of the loading bar and no signal appears.​

Read here:

GUIDE - How to Enable Intel Skylake Graphics (Intel HD Graphics 515, 520, 530, 540, 550 and 580) on macOS Ventura and Later

How to Enable Intel Skylake Graphics (Intel HD Graphics 515, 520, 530, 540, 550 and 580) on macOS Ventura and Later An EliteMacx86 Exclusive Guide - This guide covers fixing Intel Skylake Graphics on Desktops and Laptops for macOS Ventura and Later. By following this guide, you'll be able to...

elitemacx86.com

 

[User5690]

Read here:

GUIDE - How to Enable Intel Skylake Graphics (Intel HD Graphics 515, 520, 530, 540, 550 and 580) on macOS Ventura and Later

How to Enable Intel Skylake Graphics (Intel HD Graphics 515, 520, 530, 540, 550 and 580) on macOS Ventura and Later An EliteMacx86 Exclusive Guide - This guide covers fixing Intel Skylake Graphics on Desktops and Laptops for macOS Ventura and Later. By following this guide, you'll be able to...

elitemacx86.com

Update : stuck on 1/3 of the loading bar and screen is flashing , every few seconds

 

[EliteMacx86]

Update : stuck on 1/3 of the loading bar and screen is flashing , every few seconds

Provide your EFI to check further!

 

[User5690]

Provide your EFI to check further!

Here it is, my post on tonymacx86 was deleted when i uploaded my efi . I'm new to this.

 

[EliteMacx86]

Here it is, my post on tonymacx86 was deleted when i uploaded my efi . I'm new to this.

Your configuration is not as per the guide.

Start here:

GUIDE - How to Boot macOS Installer on Desktops and Laptops using OpenCore [UEFI/Legacy] - OpenCore Install Guide

How to Boot macOS Installer on Desktops and Laptops using OpenCore [UEFI/Legacy] - OpenCore Install Guide Booting the OS X/macOS installers on a non-Apple computer can be challenging for new users. This guide is intended for those who wish to use OpenCore as a Bootloader and it covers a...

elitemacx86.com

 

[User5690]

Your configuration is not as per the guide.

Start here:

GUIDE - How to Boot macOS Installer on Desktops and Laptops using OpenCore [UEFI/Legacy] - OpenCore Install Guide

How to Boot macOS Installer on Desktops and Laptops using OpenCore [UEFI/Legacy] - OpenCore Install Guide Booting the OS X/macOS installers on a non-Apple computer can be challenging for new users. This guide is intended for those who wish to use OpenCore as a Bootloader and it covers a...

elitemacx86.com

Okay, what now?

 

[User5690]

Your configuration is not as per the guide.

Start here:

GUIDE - How to Boot macOS Installer on Desktops and Laptops using OpenCore [UEFI/Legacy] - OpenCore Install Guide

How to Boot macOS Installer on Desktops and Laptops using OpenCore [UEFI/Legacy] - OpenCore Install Guide Booting the OS X/macOS installers on a non-Apple computer can be challenging for new users. This guide is intended for those who wish to use OpenCore as a Bootloader and it covers a...

elitemacx86.com

Now , I'm getting this error

 

[EliteMacx86]

Now , I'm getting this error

Your configuration is still not correct.

100 series does not require SSDT-PMC. Moreover, if you're using IGPU only, what's the reason to use SSDT-BRG0? As its a Desktop, what is SSDT-PNLF doing here?

Read the guide again and prepare the EFI from scratch.

 

[User5690]

Your configuration is still not correct.

100 series does not require SSDT-PMC. Moreover, if you're using IGPU only, what's the reason to use SSDT-BRG0? As its a Desktop, what is SSDT-PNLF doing here?

Read the guide again and prepare the EFI from scratch.

Added only USBX still getting error on photo