HP Pavilion G6 1250ej

[EliteMacx86]

Hey, do you know how to fix the sleep mode?
rn, When I press the sleep button (in MacOS), the screen turns black but the laptop keeps running and I can't wake it from sleep. If I want to get back to MacOS I have to power off the laptop (by holding the power button) and then turning it back on.

And when I am closing the lid, it doesn't put the laptop into sleep mode. Instead it just turns off the screen until I open the lid again.

Is your ACPI patched? Attach your PR files. Soon, i'll write a guide for it.

 

[ShonP40]

Laptop: HP Pavilion G6-1250ej
CPU: Intel Core i3-2330M 2.20GHz.
Chipset: HM65.
Graphics: Intel HD Graphics 3000 and AMD Radeon 6760M (Disabled because of lower performance than the iGPU).
Resolution: 1366x768.
Bootloader: Clover (Legacy). (This laptop doesn't support UEFI).

Clover bootloader folder (without serial numbers) attached below.

 

[EliteMacx86]

Laptop: HP Pavilion G6-1250ej
CPU: Intel Core i3-2330M 2.20GHz.
Chipset: HM65.
Graphics: Intel HD Graphics 3000 and AMD Radeon 6760M (Disabled because of lower performance than the iGPU).
Resolution: 1366x768.
Bootloader: Clover (Legacy). (This laptop doesn't support UEFI).

Clover bootloader folder (without serial numbers) attached below.

Here are some of the issues.

• The config.plist is not as per the guide.
• Remove UEFI directory from the drivers folder.
• ACPIBacklight is old, remove it.
• Remove VoodooHDA. Use AppleHDA instead.
• No kextcache output attached.

Start here:

GUIDE - How to Boot macOS Installer on Laptops using Clover (UEFI/Legacy)

Booting macOS installer on laptops can be a challenge for the new users. This guide covers a complete step to boot the macOS installer on your Laptop using Clover bootloader. Those who are not using Clover, can update their configuration for clover and continue to use it. Clover is one of the...

www.elitemacx86.com

 

[ShonP40]

I am using the config that I found online and its the only one thats working.
AppleHDA didn't work so I switched to VoodooHDA.

 

[EliteMacx86]

I am using the config that I found online and its the only one thats working.
AppleHDA didn't work so I switched to VoodooHDA.

You should NOT use someone else's files.

 

[ShonP40]

It’s from a tutorial I found online.
At least they are working.

 

[EliteMacx86]

It’s from a tutorial I found online.
At least they are working.

Start here:

GUIDE - How to Boot macOS Installer on Laptops using Clover (UEFI/Legacy)

Booting macOS installer on laptops can be a challenge for the new users. This guide covers a complete step to boot the macOS installer on your Laptop using Clover bootloader. Those who are not using Clover, can update their configuration for clover and continue to use it. Clover is one of the...

www.elitemacx86.com

 

[ShonP40]

Why do I need to redo it when it’s working already?
I just need to get brightness adjustment and sleep mode to work.

 

[EliteMacx86]

Why do I need to redo it when it’s working already?
I just need to get brightness adjustment and sleep mode to work.

Well, that's your wish.

For Brightness, check here:

GUIDE - How to Enable Backlight Control on Laptops [Clover/OpenCore]

How to Enable Backlight Control on Laptops [Clover/OpenCore] This guide describes the implementation of backlight control on Laptops and AIO using Clover and OpenCore bootloader. By following this guide, you'll be able to enable backlight control on your Laptop and AIO. In addition, this will...

www.elitemacx86.com

 

[ShonP40]

I followed the first method in your guide and got stuck here: