Help! Asus ROG GL552VX

[geissel]

I need your help

I have the following equipment

Main Hardware​

• CPU: Intel Core i7-6700HQ (Skylake)
• Chipset: Intel HM170 (Sunrise Point)
• RAM: 16GB DDR4 (Crucial 8GB 2666MHz + Samsung 8GB 2133MHz)
• Integrated GPU: Intel HD Graphics 530
• Display: LG Philips LP156WF6-SPB5 (15.6" LCD)
• Audio: Conexant CX20751/2

Storage

• SSD: Kingston SM2280S3G2480G (480GB SATA-III)

Connectivity​

• Wi-Fi & Bluetooth: Intel Dual Band Wireless-AC 8260

And I need to install macOS Sequoia

POST DATA, I had to delete the itlwm and Bluetooth kext so the RAR could be uploaded to this forum.

I would be grateful for your attention

 

[EliteMacx86]

I need your help

I have the following equipment

Main Hardware​

• CPU: Intel Core i7-6700HQ (Skylake)
• Chipset: Intel HM170 (Sunrise Point)
• RAM: 16GB DDR4 (Crucial 8GB 2666MHz + Samsung 8GB 2133MHz)
• Integrated GPU: Intel HD Graphics 530
• Display: LG Philips LP156WF6-SPB5 (15.6" LCD)
• Audio: Conexant CX20751/2

Storage

• SSD: Kingston SM2280S3G2480G (480GB SATA-III)

Connectivity​

• Wi-Fi & Bluetooth: Intel Dual Band Wireless-AC 8260

And I need to install macOS Sequoia

POST DATA, I had to delete the itlwm and Bluetooth kext so the RAR could be uploaded to this forum.

I would be grateful for your attention

Is there any issue with the installation?

 

[geissel]

Is there any issue with the installation?

Yes, first I installed Ventura (of course, I had to spoof the graphics for that). Everything was going fine, then I decided to upgrade to Sonoma, but since I had issues, I gave up. Time passed, and I upgraded to Sequoia (I spoofed the SMBIOS).


The update went well, and in this one, I have been trying to enable graphics acceleration, modifying the kext to the point where I got a screen with a prohibition symbol. If you could guide me and help me get back on the right track, I would really appreciate it.

I am attaching the errors I have encountered throughout the modifications, up to the last one, which is marked with the negation symbol.

You will excuse my English since I am using AI to translate. I have also used it as a help to modify some parameters.


Thanks again for your attention.

 

[EliteMacx86]

Yes, first I installed Ventura (of course, I had to spoof the graphics for that). Everything was going fine, then I decided to upgrade to Sonoma, but since I had issues, I gave up. Time passed, and I upgraded to Sequoia (I spoofed the SMBIOS).


The update went well, and in this one, I have been trying to enable graphics acceleration, modifying the kext to the point where I got a screen with a prohibition symbol. If you could guide me and help me get back on the right track, I would really appreciate it.

I am attaching the errors I have encountered throughout the modifications, up to the last one, which is marked with the negation symbol.

You will excuse my English since I am using AI to translate. I have also used it as a help to modify some parameters.


Thanks again for your attention.

Although your EFI is not proper, the issue is different. Add -disablegfxfirmware to your boot args. Remove igfxfw=2 and then check.

I also see that you've irrelevant VoodooI2C satellite kexts. Only use what's meant for your hardware.