GUIDE How to Add Memory Information in OpenCore

[EliteMacx86]

How to Add Memory Information in OpenCore

An EliteMacx86 Exclusive Guide - This guide covers adding memory information in OpenCore.

Overview

---

Adding memory information can be required if your RAM information is not detected properly or has some missing information such as Serial Number. The section is inside PlatformInfo>Memory, under Devices section.

Devices
This section provides the RAM information. The options are listed below. Similar to Clover's SMBIOS>Memory section.

Option	Notes
AssetTag	Specifies the asset tag of this memory device.
BankLocator	Specifies the physically labeled bank where the memory device is located.
DeviceLocator	Specifies the physically-labeled socket or board position where the memory device is located.
Manufacturer	Specifies the manufacturer of this memory device.
PartNumber	Specifies the part number of this memory device.
SerialNumber	Specifies the serial number of this memory device.
Size	Specifies the size of the memory device, in megabytes. 0 indicates this slot is not populated.
Speed	Specifies the maximum capable speed of the device, in megatransfers per second (MT/s). 0 indicates an unknown speed.