GUIDE How to Add Memory Information in OpenCore

EliteMacx86

Administrator
Staff member
Joined
Jul 22, 2018
Messages
2,676
Motherboard
Supermicro X11SPA-T
CPU
Intel Xeon W-3275 28 Core
Graphics
2xAMD RX 580 8GB
OS X/macOS
11.0.x
Bootloader
  1. OpenCore
Mac
  1. MacBook Pro
Mobile Phone
  1. Android
  2. iOS
How to Add Memory Information in OpenCore

An EliteMacx86 Exclusive Guide - This guide covers adding memory information in OpenCore.

Overview


Adding memory information can be required if your RAM information is not detected properly or has some missing information such as Serial Number. The section is inside PlatformInfo>Memory, under Devices section.

Devices
This section provides the RAM information. The options are listed below. Similar to Clover's SMBIOS>Memory section.

OptionNotes
AssetTag
  • Specifies the asset tag of this memory device.
BankLocator
  • Specifies the physically labeled bank where the memory device is located.
DeviceLocator
  • Specifies the physically-labeled socket or board position where the memory device is located.
Manufacturer
  • Specifies the manufacturer of this memory device.
PartNumber
  • Specifies the part number of this memory device.
SerialNumber
  • Specifies the serial number of this memory device.
Size
  • Specifies the size of the memory device, in megabytes. 0 indicates this slot is not populated.
Speed
  • Specifies the maximum capable speed of the device, in megatransfers per second (MT/s). 0 indicates an unknown speed.
 
Last edited:
Similar threads
Thread starter Title Forum Replies Date
EliteMacx86 GUIDE How to Configure Memory Settings in OpenCore OpenCore 0

Similar threads

Forum statistics

Threads
547
Messages
5,523
Members
4,904
Latest member
arxbox