SOLVED Headphone/Microphone combo port acting weird (ALC295/3542)

[Kernel]

Hello! The headphone/microphone combo port is acting weird. If I increase the volume with a speaker connected, after a point static noises starts appearing frequently until after a limit the sound stops. If I connect a headphone, after a point the sound just becomes completely distorted. (Included screenshot for reference)
Using vanilla AppleHDA with AppleALC layout ID 13
The microphone also doesn't have any input.

 

[EliteMacx86]

Hello! The headphone/microphone combo port is acting weird. If I increase the volume with a speaker connected, after a point static noises starts appearing frequently until after a limit the sound stops. If I connect a headphone, after a point the sound just becomes completely distorted. (Included screenshot for reference)
Using vanilla AppleHDA with AppleALC layout ID 13
The microphone also doesn't have any input.
View attachment 4886

No PR files attached.

 

[Kernel]

No PR files attached.

PR.zip

drive.google.com

 

[EliteMacx86]

PR.zip

drive.google.com

The Audio implementation is not correct.

- You should not inject Layout ID on PciRoot(0x0)/Pci(0x1b,0x0) as it is required for Broadwell and prior.
- You're injecting Layout ID= 77 in HDEF, whereas, Layout ID=13 in boot arg. Both the Layout ID should be the same.
- Kexts sorting order is not correct. All mandatory kexts must load first.
- Unnecessary Drivers are added. Read below

GUIDE - How to Install macOS On PC Without Mac | Hackintosh | No Mac Required | Step By Step Guide

How to Install macOS On PC Without Mac | Hackintosh | No Mac Required | Step By Step Guide Booting the OS X/macOS installers on a non-Apple computer can be challenging for new users. This guide is for those who wish to use OpenCore as a Bootloader and it covers a complete process to boot the OS...

elitemacx86.com

 

[Kernel]

The Audio implementation is not correct.

- You should not inject Layout ID on PciRoot(0x0)/Pci(0x1b,0x0) as it is required for Broadwell and prior.

Removed the entry.

- You're injecting Layout ID= 77 in HDEF, whereas, Layout ID=13 in boot arg. Both the Layout ID should be the same.

Fixed HDEF layout ID, removed boot arg.

- Kexts sorting order is not correct. All mandatory kexts must load first.
- Unnecessary Drivers are added. Read below

Tried to resort kexts, no drivers removed because I don't know which to remove.
The problem is still the same. Attached the new config.plist because only that was changed.

 

[EliteMacx86]

Tried to resort kexts, no drivers removed because I don't know which to remove.

Read here

GUIDE - How to Install macOS On PC Without Mac | Hackintosh | No Mac Required | Step By Step Guide

How to Install macOS On PC Without Mac | Hackintosh | No Mac Required | Step By Step Guide Booting the OS X/macOS installers on a non-Apple computer can be challenging for new users. This guide is for those who wish to use OpenCore as a Bootloader and it covers a complete process to boot the OS...

elitemacx86.com

 

[Kernel]

OK, so I will remove 3 drivers:
OpenPartitionDxe.efi
PS2MouseDxe.efi
UsbMouseDxe.efi

Removed them, issue still the same.

 

[EliteMacx86]

OK, so I will remove 3 drivers:
OpenPartitionDxe.efi
PS2MouseDxe.efi
UsbMouseDxe.efi

Removed them, issue still the same.

You need to remove the following
CrScreenshotDxe.efi
OpenNtfsDxe.efi
Ps2KeyboardDxe.efi

Try Layout ID=13 and then check. Make sure your kexts are up-to-date.

On a side note, make sure you're using a genuine AC Adapter.

 

[Kernel]

On a side note, make sure you're using a genuine AC Adapter.

Yeah, I am using the one that came with the laptop.
Already using layout-id 13.
Should I update to the latest OpenCore? (0.8.2->0.8.3)
Removed the drivers you said.

 

[Kernel]

Also the speakers are detected as headphones and the output menu in system preferences says headphone port.