• Become a Premium Member for $25/year with no ads to improve your community experience. Upgrade to Pro Account for faster response and no wait times!

SOLVED RT.GV Failure for Sequoia AMD installation

Status
Not open for further replies.

Dsmitti01

New member
Joined
Jan 27, 2025
Messages
4
Motherboard
ASRock A520M-HDV Micro ATX AM4 Motherboard
CPU
AMD Ryzen 9 3900X
Graphics
RX 580
OS X/macOS
15.x
Bootloader
  1. OpenCore (UEFI)
Mac
  1. iMac Pro
  2. Mac Pro
Mobile Phone
  1. Android
Hello, I am quite new to this and I'm getting a error message upon opencore boot screen.
75bb5344-8d67-4971-94df-fcc9b5c16194-1_all_1987.jpg
Here are my specs...
AMD Ryzen 9 3900X CPU
ASRock AM4 A520M-HDV Micro ATX Motherboard
Sapphire Nitro+ RX 580 GPU
Kingston Fury Beast RGB 64GB DDR4-3600 RAM
Western Digital WD_Black SN850X 2TB SSD
Fenvi FV-T919 Adapter

I can upload any files necessary from the EFI drive if need be. Any help would be appreciated thanks!
 
To update, here is the current config.plist I have.
 

Attachments

To update, here is the current config.plist I have.
Your EFI isn't as per the guide

Here are a few issues. Make the following changes to your config.plist:

- Disable ResetLogoStatus
- Disable EnableWriteUnprotector and Enable RebuildAppleMemoryMap
- Enable SyncRuntimePermissions
- Disable FixupAppleEfiImages
- Remove NootedRed. 3900X does not have APU.
- Remove CryptexFixup. You shouldn't need this.
- If 4G Decoding is not available within the BIOS, then only use npci=0x3000.

Once you're done with the changes, save your config.plist. Restart the system and reset NVRAM twice. Attach the new PR files.
 
Your EFI isn't as per the guide

Here are a few issues. Make the following changes to your config.plist:

- Disable ResetLogoStatus
- Disable EnableWriteUnprotector and Enable RebuildAppleMemoryMap
- Enable SyncRuntimePermissions
- Disable FixupAppleEfiImages
- Remove NootedRed. 3900X does not have APU.
- Remove CryptexFixup. You shouldn't need this.
- If 4G Decoding is not available within the BIOS, then only use npci=0x3000.

Once you're done with the changes, save your config.plist. Restart the system and reset NVRAM twice. Attach the new PR files.
I actually should have updated this a while ago. But after some trial and error doing I believe some of those steps, I actually got it to work. Everything works like a charm, Wi-Fi, Bluetooth and everything!
 
I actually should have updated this a while ago. But after some trial and error doing I believe some of those steps, I actually got it to work. Everything works like a charm, Wi-Fi, Bluetooth and everything!
Sounds good. Marking SOLVED and closing this thread now.
 
Status
Not open for further replies.

Forum statistics

Threads
1,936
Messages
18,095
Members
27,840
Latest member
natsukiro