Titan Ridge Thunderbolt on Hackintosh

[PTuser]

Hi - I am running Catalina 10.15.6 and have installed a titan ridge card flashed with dsm firmware on my non header machine. with the modded tb header pin fix. All TB devices I have are working except for the most important one, which is a Focusrite red range thunderbolt audio interface. This device is seen in the system in sys profiler and I have green Thunderbolt lights on the device . It can be controlled by thunderbolt but it wont work with system audio. I tried this device in a mac mini with tb2 and it worked fine so something is not right in my implementation. Im looking for some help to find the solution. I took IO reg screenshots of the working mac mini and my hackintosh and there are some differences however Im not clear on how to edit SSDT or other solutions

 

[EliteMacx86]

Hi - I am running Catalina 10.15.6 and have installed a titan ridge card flashed with dsm firmware on my non header machine. with the modded tb header pin fix. All TB devices I have are working except for the most important one, which is a Focusrite red range thunderbolt audio interface. This device is seen in the system in sys profiler and I have green Thunderbolt lights on the device . It can be controlled by thunderbolt but it wont work with system audio. I tried this device in a mac mini with tb2 and it worked fine so something is not right in my implementation. Im looking for some help to find the solution. I took IO reg screenshots of the working mac mini and my hackintosh and there are some differences however Im not clear on how to edit SSDT or other solutions

Start here:

GUIDE - How to Enable Thunderbolt 3 Hotplug on macOS

How to Enable Thunderbolt 3 Hotplug on macOS [Clover/OpenCore] An EliteMacx86 Exclusive Guide - This guide covers the implementation of Thunderbolt™ 3 Hotplug on macOS for single and multiple Thunderbolt 3 Cards. Overview An EliteMacx86 Exclusive Guide - In our previous post, we covered a...

www.elitemacx86.com

 

[PTuser]

Start here:

GUIDE - How to Enable Thunderbolt 3 Hotplug on macOS

How to Enable Thunderbolt 3 Hotplug on macOS [Clover/OpenCore] An EliteMacx86 Exclusive Guide - This guide covers the implementation of Thunderbolt™ 3 Hotplug on macOS for single and multiple Thunderbolt 3 Cards. Overview An EliteMacx86 Exclusive Guide - In our previous post, we covered a...

www.elitemacx86.com

Hi - thanks for your message - I did read that - I thought this may be a bit different given the device is seen hence the post - however I will post my findings on that thread....

 

[EliteMacx86]

Hi - thanks for your message - I did read that - I thought this may be a bit different given the device is seen hence the post - however I will post my findings on that thread....

Sure.

 

[iDon't]

Sorry for hijacking this thread, but what are the right BIOS settings after flashing the card, and do i need an SSDT? Can't get my UAD interface to work at higher sample rates than 48Khz without noises

 

[EliteMacx86]

Sorry for hijacking this thread, but what are the right BIOS settings after flashing the card, and do i need an SSDT? Can't get my UAD interface to work at higher sample rates than 48Khz without noises

You should reading the thread linked below.

GUIDE - How to Enable Thunderbolt 3 Hotplug on macOS

How to Enable Thunderbolt 3 Hotplug on macOS [Clover/OpenCore] An EliteMacx86 Exclusive Guide - This guide covers the implementation of Thunderbolt™ 3 Hotplug on macOS for single and multiple Thunderbolt 3 Cards. Overview An EliteMacx86 Exclusive Guide - In our previous post, we covered a...

elitemacx86.com