Post Installation refinement using debug 1.0.3 and 1.0.4 on Colorful B650 AMD board

[DASBOOT5]

If I attach my EFI's, serials removed, and Debug files, could you take a look at the EFI's for errors and anything that may be corrected from the debug logs from 1.0.3 and 1.0.4?
I have a running version of Sequoia 15.2 my Colorful MATX B650 Ryzen 7 7700 RX 6600 using release. But the debug versions will not complete boot, (on a flash drive), for testing although
they create debug logs. I am also working on the MIMO whitelist area which was the reason for the debug tests. Let me know if you are game for the lookover of my work
EFI from 1.0.3 ,1.0.4 and debug log file, can be uploaded for checking....
Here is non-booting config.plist fromEFI from 15.2 Sequoia flash with 1.0.3 debug OC and Log file in rtf format. since you have a server upload restriction that will not allow me to attach my EFI compressed

 

[EliteMacx86]

If I attach my EFI's, serials removed, and Debug files, could you take a look at the EFI's for errors and anything that may be corrected from the debug logs from 1.0.3 and 1.0.4?
I have a running version of Sequoia 15.2 my Colorful MATX B650 Ryzen 7 7700 RX 6600 using release. But the debug versions will not complete boot, (on a flash drive), for testing although
they create debug logs. I am also working on the MIMO whitelist area which was the reason for the debug tests. Let me know if you are game for the lookover of my work
EFI from 1.0.3 ,1.0.4 and debug log file, can be uploaded for checking....
Here is non-booting config.plist fromEFI from 15.2 Sequoia flash with 1.0.3 debug OC and Log file in rtf format. since you have a server upload restriction that will not allow me to attach my EFI compressed

Firstly, switch to the official Kexts and ACPI files.

Replace SSDT-EC and SSDT-USBX with SSDT-EC-USBX-DESKTOP. You can also note down the path and then directly change the path in the SSDT-EC-USBX (provided in the official OC package).
Disable ResetLogoStatus
If you have a restart issue, then only use DisableVariableWrite. Otherwise, disable it.
RX 6600 is a natively supported GPU. Why are you using NootRX?
You should disable the CustomSMBIOSGuid
Remove DebugEnhancer
Any specific reason to use PollAppleHotKeys?
Remove the debug args and add agdpmod=pikera
Set UpdateSMBIOSMode to Custom

 

[DASBOOT5]

1. All kexts that were available as debug versions on this site were used: https://dortania.github.io/builds/
2. This is a dual boot Windows 11 machine , SSDT-EC and SSDT-USB were created from SSDT time for this specific board.
3. I am not using WG and the boot arg agdpmod=pikera for the 6600. Debug is what I trying to accomplish. The version of OC I am using for testing is Debug and it will not boot. The Release 1.0.3 does boot, without error.
4. CustomSMBIOSGuid enabled and UpdateSMBIOSMode to Custom are set properly for my dual boot situation.
You did not make any comments on debug log file.
5. Debug kexts and drivers for Debug, release Kexts and Drivers for Release OC. Debug does not boot Release does.