Cannot Boot to installer on Ryzen 5 5600H

[SidMan]

Cannot boot to installer on Ryzen 5 5600H
Config : https://pastebin.com/RervA7tN

 

[SidMan]

It seems I had not installed the usb mapping correctly. The error is gone but I cannot enter setup. I still see black screen.

 

[EliteMacx86]

It seems I had not installed the usb mapping correctly. The error is gone but I cannot enter setup. I still see black screen.

Your configuration is not as per the guide.

Start here:

 

[SidMan]

Fixed. For future readers use the following drivers instead of ones recommended by Dortania guide.

GitHub - RattletraPM/GUX-RyzenXHCIFix: A fork of GenericUSBXHCI aimed at analyzing and fixing the USB3 issue on some Ryzen APU-based 11.0+ hackintoshes

A fork of GenericUSBXHCI aimed at analyzing and fixing the USB3 issue on some Ryzen APU-based 11.0+ hackintoshes - RattletraPM/GUX-RyzenXHCIFix

github.com

Hackintosh booted and working.

 

[EliteMacx86]

Fixed. For future readers use the following drivers instead of ones recommended by Dortania guide.

GitHub - RattletraPM/GUX-RyzenXHCIFix: A fork of GenericUSBXHCI aimed at analyzing and fixing the USB3 issue on some Ryzen APU-based 11.0+ hackintoshes

A fork of GenericUSBXHCI aimed at analyzing and fixing the USB3 issue on some Ryzen APU-based 11.0+ hackintoshes - RattletraPM/GUX-RyzenXHCIFix

github.com

Hackintosh booted and working.

Indeed. It's required for Laptops having dual XHC controllers as stated in the guide.

 

[SidMan]

Indeed. It's required for Laptops having dual XHC controllers as stated in the guide.

Can you recreate the guide using propertree since that is used everywhere ?

 

[EliteMacx86]

Can you recreate the guide using propertree since that is used everywhere ?

Propertree has bugs and it's not GUI friendly which can be difficult for newbie. Keeping that in mind, we use OCAT. GUI friendly and supports all platforms.

 

[ApicoNamaco]

Hello, I have the same laptop with the ryzen 7 5800h, i am always running in and error IONVME and i never manage to get to boot. I have tried almost anything till this point, i know that my m.2 ssd is compatible, my system haves 2, both of them compatible. i have tried with and without VNMEFIx.kex, any ideas?

 

[EliteMacx86]

Hello, I have the same laptop with the ryzen 7 5800h, i am always running in and error IONVME and i never manage to get to boot. I have tried almost anything till this point, i know that my m.2 ssd is compatible, my system haves 2, both of them compatible. i have tried with and without VNMEFIx.kex, any ideas?

Please provide the screenshot of the KP.