Universal Control Keeps Disconnecting

[EliteMacx86]

PR Files attached:

The commands below didn't do seem to do anything.

• log show --last boot | grep "trims took"
• sudo kextcache -i /

Thank you!

The system in the question is exactly the same that is indicated in your profile?

Try with ExtendBTFeatureFlags and then check.

 

[Zachb36]

The system in the question is exactly the same that is indicated in your profile?

Try with ExtendBTFeatureFlags and then check.

Yes, that's the system.

I've tried with

The system in the question is exactly the same that is indicated in your profile?

Try with ExtendBTFeatureFlags and then check.

Added that.

• sudo kextcache -i /

Says kmutil rebuild done

But this command results in no output after I enter it.

• log show --last boot | grep "trims took"

 

[EliteMacx86]

Yes, that's the system.

I've tried with

And what's the result now?

sudo kextcache -i /

Is depreciated. Can be ignored.

log show --last boot | grep "trims took"

Umm, that should work. What's the boot disk model?

 

[Zachb36]

And what's the result now?

Is depreciated. Can be ignored.


Umm, that should work. What's the boot disk model?

It's a SATA SSD drive.

Still same results with ExtendBTFeatureFlags

 

[EliteMacx86]

It's a SATA SSD drive.

Still same results with ExtendBTFeatureFlags

Whats your other iDevice? Provide a picture of Library/Preferences/SystemConfiguration

 

[Zachb36]

Whats your other iDevice? Provide a picture of Library/Preferences/SystemConfiguration

 

[EliteMacx86]

Backup the entire directory and delete all the .plists with the preference name, except for preferences.plist.

Also, what is your other iDevice you're using Universal Control from?

 

[Zachb36]

Backup the entire directory and delete all the .plists with the preference name, except for preferences.plist.

Also, what is your other iDevice you're using Universal Control from?

I'm using a macbook air (which it doesn't see or connect to) and my iPad Air m2

 

[EliteMacx86]

I'm using a macbook air (which it doesn't see or connect to) and my iPad Air m2

Would suggest you to check in wired mode and see the results. If its stable, then it would be the time for a thorough debugging.