GUIDE How to Patch Laptop DSDT and SSDTs

[biglibigli]

Hi, I have Catalina on my laptop as shown in my profile.
I disassembled origin with no error.
Open dsdt with MaciASL and just press complie btn to see are there any errors and there was 3. I attached photo of them. How can I fix them ?

5863, 6126, syntax error, unexpected PARSEOP_ZERO
5908, 6126, syntax error, unexpected PARSEOP_ZERO
10320, 6126, syntax error, unexpected PARSEOP_NAME, expecting $end and premature End-Of-File

 

[Chucksmmadu]

Ok thanks for this! I've applied it... I think my dsdt patches are now complete... But my battery capacity is still wrong... Sometimes, it sayd plugged in not charging same behavior in windows 10 as well. Does it mean i need a battery replacement?

 

[EliteMacx86]

Hi, I have Catalina on my laptop as shown in my profile.
I disassembled origin with no error.
Open dsdt with MaciASL and just press complie btn to see are there any errors and there was 3. I attached photo of them. How can I fix them ?

5863, 6126, syntax error, unexpected PARSEOP_ZERO
5908, 6126, syntax error, unexpected PARSEOP_ZERO
10320, 6126, syntax error, unexpected PARSEOP_NAME, expecting $end and premature End-Of-File

Apply "[syn] Fix PARSEOP_ZERO Error (aggresive) patch from the error. It should be error free.

 

[EliteMacx86]

Ok thanks for this! I've applied it... I think my dsdt patches are now complete... But my battery capacity is still wrong... Sometimes, it sayd plugged in not charging same behavior in windows 10 as well. Does it mean i need a battery replacement?

This is a common issue with many HP Laptops. Especially the Pavilion series. If it's same in Windows 10, two reasons.
1. The battery replacement is needed.
2. Battery still has capacity and power but the mosfet which handles the battery charging, is defective.

 

[biglibigli]

Apply "[syn] Fix PARSEOP_ZERO Error (aggresive) patch from the error. It should be error free.

thanks, All errors gone by deleting zeros causing error.
I used these patches on DSDT :

audio Layout ID 3
Rename GFX0 to IGPU
Fix _WAK Arg0 v2
Fix Mutex with non-zero SyncLevel
HPET Fix
IRQ Fix
OS Check Fix
RTC Fix
SMBUS Fix
Haswell LPC
6-series USB
7-series/8-series USB

and not used these :
-----Rename B0D3 to HDAU
-----Fix PNOT/PPNT (use only if you're dropping CPU related SSDTs)
-----Add IMEI (do not use if your DSDT or SSDTs already have IMEI/HECI/MEI device)

result :

Audio worked.
Wireless AC Atheros ATH9565 NOT work (how can I be sure this is my exact wifi model ?)
touchpad NOT work. (must be I2C again not sure)
Battery icon showed but always 0% and when I unplug adapter says no battery connect adapter

How can I fix these ?
I didn't patch any SSDTs because there is many and I don't know which one should I open and patch !!!

 

[EliteMacx86]

thanks, All errors gone by deleting zeros causing error.

Perfect!

Haswell LPC
6-series USB
7-series/8-series USB

These are not intended for your Laptop. Looks like you forgot to read the notes.
Your WiFi is Qualcomm Atheros QCA9377 as per the Device ID which is incompatible. Replace with a compatible one

touchpad NOT work. (must be I2C again not sure)

You need to patch DSDT for it. Read here:

Documentation

Battery icon showed but always 0% and when I unplug adapter says no battery connect adapter

Did you applied the battery patch?

I didn't patch any SSDTs because there is many and I don't know which one should I open and patch !!!

Patching SSDTs is a full configuration which i recommend. You need to follow the guide.

 

[biglibigli]

Haswell LPC
6-series USB
7-series/8-series USB
These are not intended for your Laptop. Looks like you forgot to read the notes.
Your WiFi is Qualcomm Atheros QCA9377 as per the Device ID which is incompatible. Replace with a compatible one

my mistake ,should I undo these ? also don't know how !

You need to patch DSDT for it. Read here:
Documentation

I will do it

Did you applied the battery patch?

yes I did. I also had ACPIBatteryManager.kext in clover kext

Patching SSDTs is a full configuration which i recommend. You need to follow the guide.

does it have a full guide thread ? can you mention it ?

 

[EliteMacx86]

my mistake ,should I undo these ? also don't know how !

Notes were there. Probably, you didn't read or didn't understood.

yes I did. I also had ACPIBatteryManager.kext in clover kext

Which battery patch you applied?

does it have a full guide thread ? can you mention it ?

Yes, of course. Read here:

GUIDE - How to Patch Laptop DSDT and SSDTs

How to Patch Laptop DSDT and SSDTs This guide covers patching Laptop DSDT and SSDTs for macOS/OS X. By following this guide, you'll be able to patch your OEM DSDT/SSDTs. I. Overview To enable macOS features and various hardware and maintain stability, DSDT and SSDTs patching are required...

www.elitemacx86.com

Scroll down to SSDT patch.

 

[Chucksmmadu]

Good day elitemacx86, here's my pr file

I also attached a log file for my acpi files disassembly process using the "iasl -da -dl DSDT.aml SSDT*.aml" to extract (maybe it might help).

 

[Chucksmmadu]

But using "iasl -dl DSDT.aml SSDT*.aml" to extract, i get this instead.. I'm now confussed... I don't even know if my battery patch is to be blamed What bugs me most is that it carries over this weird behaviour to windows 10 and my battery has never charged up to 100% for over three days now even if i leave it plugged for over 8 hours