EliteMacx86

Administrator
Staff member
Joined
Jul 22, 2018
Messages
2,827
Motherboard
Supermicro X11SPA-T
CPU
Intel Xeon W-3275 28 Core
Graphics
2xAMD RX 580 8GB
OS X/macOS
11.0.x
Bootloader
  1. OpenCore
Mac
  1. MacBook Pro
Mobile Phone
  1. Android
  2. iOS
Hi!

Which PR files do you actually need?

By the way, I fugured out that vt-d still doens’t show up in IOReg.

Even If I :
enabled VT-d in the BIOS (latest version)
disable Thunderbolt Vt-d security in BIOS -> BTW, is it relevant?
removed dart=0 from Boot arg,
unchecked disable iomapper in my Clover config (see attached)

Still no AppleVTD...

So I also tried to take out the drop DMAR table, as mentionned by CaseSJ on TonyMacx...


But when I do so, my hack doesn't boot anymore and show this (see attached).

Any idea what's wrong?

BTW, I have 2 Corsair Vengeance LPX Series Low Profile 32 Go (2x 16 Go) DDR4 2666 MHz CL16 in SLOT A1 & B1

Many thanks for your help!
No PR files attached. Check the Thunderbolt Hotplug guide below to attach the required PR files.

 

sashondrums

New member
Joined
Dec 30, 2021
Messages
1
Motherboard
NUC8i7HVB
CPU
Intel® Core™ i7-8809G Processor with Radeon™ RX Vega M GH graphics (8M Cache, up to 4,20 GHz)
Graphics
RX Vega M GH
OS X/macOS
10.15.x
Bootloader
  1. OpenCore
Mac
  1. Mac mini
Mobile Phone
  1. iOS
Hello Guys.
I tried to get my Orion Studio Synergy Core running on my Intel NUC 8I7HVK HAdes Canyon with no success.

I m running MAC OS Catalina 10.15.7 on it.
BY the way…. The NUC was set up by DSM2.


I want it to run via Thunderbolt 3.

I didn’t understand your guide completly.

Can anyone tell me more about how to get the Antelope Interface run with Thunderbolt 3 on my NUC.

One Example: I don’t have this Entry:
5. From Boot args, remove "dart=0." in my Boot args.

Thanks a lot.
 
Last edited:

EliteMacx86

Administrator
Staff member
Joined
Jul 22, 2018
Messages
2,827
Motherboard
Supermicro X11SPA-T
CPU
Intel Xeon W-3275 28 Core
Graphics
2xAMD RX 580 8GB
OS X/macOS
11.0.x
Bootloader
  1. OpenCore
Mac
  1. MacBook Pro
Mobile Phone
  1. Android
  2. iOS
I didn’t understand your guide completly.
What part?
Can anyone tell me more about how to get the Antelope Interface run with Thunderbolt 3 on my NUC.
The guide describes it all. First you need to have a Thunderbolt working and then just follow this guide.
One Example: I don’t have this Entry:
5. From Boot args, remove "dart=0." in my Boot args.
It's very clear. If you have dart=0 from Boot Args, remove that. If your boot arg does not have it, simply ignore.
 

graffy

New member
Joined
Jan 5, 2022
Messages
1
Motherboard
Asus prime Z390-A + Asus ThunderboltEX 3 (nvm26)
CPU
Intel core i5 9400F
Graphics
AMD RX 560 4go
OS X/macOS
10.15.x
Bootloader
  1. Clover (UEFI)
Mac
  1. iMac
Mobile Phone
  1. Android
Hi,
Thanks for your advices !!.
I struggled a lot before finding the right configuration, I even went through the flash bios box of my Asus thunderboltEX3 with a CH341usb ...
After going back to the original bios (nvm26), I finally found the TB3 SSDT that I modified at the address RP17 according to your procedure.
Also find the correct bios setup.
I could install my Antelope discrete 8 Synergy Core via Thunderbolt on my Hakcintosh Catalina.

My configuration:
Asus Prime Z390-A
Intel core I5 9400F
Asus ThunderboltEX 3 (nvm26) in slot 3 (x4 in bios !! Important because it’s X2 for slot 3 with load optimized bios F5)
Firewire pci card FW400 / 800
32GB XMP DDR4 2666mhz
Samsung 970 pro 250GB NVME SSD (Mac OS)
Crucial SSD mx500 500GB x2 (one for User / home, one for Session Studio)
2.5 "SATA 1TB HDD (Time machine)
AMD RX 560 4GB
Antelope discrete 8 synergy core (thunderbolt)
MOTU 8PRE (Firewire) and ADAT-> Antelope D8SC.

- Hot-plug Thunderbolt work !!
- AFX2DAW work !!

Happy New Year to you
THX

Edit :
You will find in the attached zip file the "patched" folder the files to copy to your uefi / clover / acpi / patched folder. TB3 file (thunderbolt) is written for address RP17.
Please follow the procedure on this thread to change the address if yours is different.
 

Attachments

  • 88717A39-CDA1-4441-AE56-96CDE85ABACC.jpeg
    88717A39-CDA1-4441-AE56-96CDE85ABACC.jpeg
    260.6 KB · Views: 31
  • 21CD7E28-CFC3-4C85-87B6-59D99FA4835B.jpeg
    21CD7E28-CFC3-4C85-87B6-59D99FA4835B.jpeg
    300.5 KB · Views: 31
  • 8998DF5F-D713-4C2C-AC6A-871FEF86F454.jpeg
    8998DF5F-D713-4C2C-AC6A-871FEF86F454.jpeg
    128.4 KB · Views: 32
  • patched.zip
    3.2 KB · Views: 14
Last edited:
  • Like
Reactions: EliteMacx86

EliteMacx86

Administrator
Staff member
Joined
Jul 22, 2018
Messages
2,827
Motherboard
Supermicro X11SPA-T
CPU
Intel Xeon W-3275 28 Core
Graphics
2xAMD RX 580 8GB
OS X/macOS
11.0.x
Bootloader
  1. OpenCore
Mac
  1. MacBook Pro
Mobile Phone
  1. Android
  2. iOS
Hi,
Thanks for your advices !!.
I struggled a lot before finding the right configuration, I even went through the flash bios box of my Asus thunderboltEX3 with a CH341usb ...
After going back to the original bios (nvm26), I finally found the TB3 SSDT that I modified at the address RP17 according to your procedure.
Also find the correct bios setup.
I could install my Antelope discrete 8 Synergy Core via Thunderbolt on my Hakcintosh Catalina.

My configuration:
Asus Prime Z390-A
Intel core I5 9400F
Asus ThunderboltEX 3 (nvm26) in slot 3 (x4 in bios !! Important because it’s X2 for slot 3 with load optimized bios F5)
Firewire pci card FW400 / 800
32GB XMP DDR4 2666mhz
Samsung 970 pro 250GB NVME SSD (Mac OS)
Crucial SSD mx500 500GB x2 (one for User / home, one for Session Studio)
2.5 "SATA 1TB HDD (Time machine)
AMD RX 560 4GB
Antelope discrete 8 synergy core (thunderbolt)
MOTU 8PRE (Firewire) and ADAT-> Antelope D8SC.

- Hot-plug Thunderbolt work !!
- AFX2DAW work !!

Happy New Year to you
THX
Glad you got it working :)

Happy New Year!
 
  • Like
Reactions: graffy

Forum statistics

Threads
574
Messages
5,841
Members
5,089
Latest member
OmegaRed1723