Search results

i I used the 2nd method and My hackintosh is much speedier. Attached the Geekbench before and after of PM. Thanks for your help.

I needed the xcode version 13.3.1 , therefore i cannot stick with Big Sur. Regarding Graphics acceleration, after OCLP patch it's usable for me. i disagree with your second statement. Admin has requested me to use OCLP and it's done the purpose.

ADATA SP550 120GB. Yes Trim is enabled. I followed the above guide and when running "ssdtPRGen.sh" , I received a message as attached( Warning: 'cpu-type' may be set improperly (0x0604 instead of 0x0704) & Error: board-id [Mac-E43C1C25D4880AD6] not supported by Ivy Bridge – check SMBIOS data...

Hi, After the hackintosh Monterey , i enabled the graphics acceleration by OCPL. Even after that Applications are very slowly starting and hard to use them. It's very Sluggish . My new SATA 3 SSD write speed is decreased less than 100Mbps.The same drive i checked the Disk speed in Windows...

i tried alcid=14, unfortunately it's not worked. I tried 3,12,13,14,28 nothing worked. in the list of AppleALC supported codecs github page, doesn't have my model "conexant CX20672-21Z". Can you help me please?

what you are saying is try the bootargs alcid=14 ?

No, i just only need audio output from laptop speaker to be worked, quality is better or not, that is not a problem. If there is a easy way to get it done, please advise. in your Audio guide, it's so many sub articles to refer and it's confusing for me. Thanks

How can i find the alcid id for my hardware conexant CX20672-21Z ?

1. After adding SMCBatteryManager.kext , ECEnabler.kext Battery percentage is now showing. It's done. 2. is there a Patcher / Tool like , OCLP for Audio ? patching with OCLP,"Post-intall volume patch" have been easier for me. But the Audio guide is overwhelming and confusing. 3. is there a...

What kind of post-installation settings should i do to enable Battery , Audio, bluetooth? Please advise .

I Finally acheived the graphic acceleration with your support. Thanks so much for your help. Disabling the SIP with NVRAM-->csr-active-config doesn't work. I disabled the SIP through recovery mode -> terminal "csrutil disable". Then only i'm able to use the "Post-intall volume patch" . After...

Resolution is 1366 x 768 find attached Hackintool Pcle export

Thanks in Advance. Attached the EFI

It worked. After enabled the XhciPortLimit Quirk in Kernel & disabled the USB renames it booted and I installed the Monterey 12.6 . But Graphics 4MB only detected. Refer the attached Screenshot. Kindly advice me to achieve the graphics acceleration and get my full 1536MB. It is the first...

after adding the CtlnaAHCIPort.kext , i disabled the XhciPortLimit Quirk in Kernel. Still the result is same. Should i enable the XhciPortLimit Quirk in Kernel too?

Sorry for my bad understanding. I thought that no need to add CtlnaAHCIPort.kext , if AHCI is set to SATA operations. now i understand. I will add CtlnaAHCIPort.kext , keep you updated

After the previously mentioned try, i enabled XhciPortLimit Quirk in Kernel. Then i resetted nvRam twice and try the installer. Same error is showing . You have advised me to map the USB ports , after the enabling of XhciPortLimit Quirk in Kernel. But please advise , how to map the usb ports...

Disabled the ResetLogoStatus and sett the Hibernation Mode to None ✅ From Bios it's already set to the AHCI for SATA OPERATIONS. ✅ After the above changes, saved the config.plist. Resetted NVRAM twice and booted into the installer. Same error Screen shown with the not permitted icon in the...

can you please look in to my EFI and find the issue?

Hi, i done everything as per your instruction and the Guides. 1. I used the smbios of MacBookPro11,2 and booted. Received an error message as attached . MAC-3CBD00234E554E41 is the motherboard code of MacBookPro11,2 . as per the article "https://support.apple.com/en-us/HT212551" , MBP 11,2...