Search results

Something is wrong. Your config had iMac SMBIOS but Hackintool shows different. Stick to iMac18,1 and define the connectors for the physical ports and then attach a copy of IOReg. If you get no display, configure VNC to login.

No, choose one. Also, have you injected the correct EDID? There is a usr who had similar issue. What's the WEG version?

Great. Marking Solved and closing this thread

What version you had originally and what was the version you downloaded?

DVMT must be set to 64MB only.

Remove BrcmBluetoothInjector.kext and NVMeFix.kext and then check. DisableRtcCheclsum shouldn't be needed as well. Attach a copy of IOReg as well.

Why are you using AirportItlwm and itlwm together?

The framebuffer patching is not correct. Also, the HP BIOS should have an option to set the DVMT to 64MB.

Double check the BIOS settings. Could it be possible that the system is booting from a different EFI than the one you're attaching?

Have you set the SATA mode to AHCI in BIOS?

Load Early should be disabled. Does the BIOS has option for DVMT? If so, how much you have set it to? Use -igfxvesa boot arg and you should be able to reach the installer and can install as well.

There is a KP. Just to double check, you're using Mavericks and want to upgrade it to High Sierra right?

Graphics doesn't seem to be working

Firstly, you should disable the APU in the Graphics if you don't need it on other OS and will also have to use SSDT-PLUG-ALT.aml. Secondly, as the APU is incompatible, NootedRed must be removed as well. You'll also have to switch to iMacPro1,1 and remove npci flags if the BIOS has Above 4G...

10100 is Comet Lake. What does Raptor Lake EFI has to do here?

Could you explain what accelerators is being referred to here?

Yes, the APU is compatible and the HDMI Audio works fine

Hello and Welcome to EliteMacx86!

Set DVMT to 64MB and remove fbmem and stolenmem entry and consider using OCLP for using the SKL framebuffer.

Enable verbose and then attach a video.